Damage of edge wear after wear of lifting belt webbing sling belt manufacturers

In the previous article, we introduced the local wear produced in the process of using the lifting belt. This time, we will dissect another kind of wear, the edge wear of the lifting belt. Edge wear on lifting spits may not be important for products other than lifting straps, but lifting straps with synthetic fiber webbing can be deadly. First of all, we all know that fiber webbing is made by weaving machine once, and the edge of the webbing plays a tight state. So a ribbon edge by the destruction of wear, especially the lifting belt in the state of force, webbing sling belt manufacturers no doubt the damage strength, so when we found ribbon edge wear, should immediately stop using.

Lifting belt partial wear lifting belt

Lifting belt edge wear, there are two main types in the form of case is suspended material surface is too rough, it will cause the ribbon when lifting the edges of the fiber produced by friction wear, the wear time after wear, we can understand the indirect wear to filaments indirect wear, said is a row of filaments after it is not left to or from right to left, One that does not leak wears off at one end and wears off indirectly. In the second case, on the contrary, such wear is caused by the sharp edge of the suspended object. webbing sling belt manufacturers When the edge of the suspended object is too sharp, the lifting belt will suffer an instant cut between the suspended object and the spreader due to the impact of the express under stress. These cuts also start at the edges. This kind of edge cut is more dangerous to the hoisting belt than the seed, because it is formed instantly. If you add too much speed and shaking force, then the suspended object will fall instantly.webbing sling belt manufacturers

Lifting belt edge wear lifting belt wear

So when we are lifting objects, whether they are too rough or the edges are too sharp, we need to take measures. If conditions allow we can contact hoisting belt manufacturer produces a number of hoisting with case, in the part of the rough and sharp, if conditions don’t allow, bad things we have to use a similar rubber piece will be crane hoisting belt and isolated, and paying attention to the change of the sling, in order to achieve the purpose of transportation.