The key role of Lifting Sling Belt container Sling is to carry out Lifting or rotating transformation, to help people improve the work efficiency of appropriate grasp and the actual operation of Lifting Sling Belt container Sling can reduce the risk of safety, Briefly talk about how to lift Sling Briefly talk about how to lift Lifting Sling Belt container Sling actual operation, and how to carry out late maintenance.
The bottom side lock head of container Sling is usually used for Lifting containers without a top. Lifting operations can be carried out with galvanized steel rope Lifting rope; Loading, unloading and handling of container spindles under 40T gantry, the spindles are very light, small hoist, simple operation and less project investment. Two kinds of crane are available: 32T -- 20 and 40T -- 40.
Actual operation: Spreader first of three main raw steel wire rope and a converted to ductility galvanized steel wire rope lifting hook of the crane, in whose hands to open before the lifting position, using spreader four side positioning device and driver skilled operation method, turn lock embedded container spreader of four corner, then make the lifting hook slowly lifting, The malleable galvanized steel wire rope is tightened first and driven to the organization so that the twistlock rotates 90 degrees to close, and the lifting hook can be lifted again to lift the container.
First, when selecting the specification of the sandwich sling, the specification and weight of the load to be lifted and the lifting method to be accepted must be fully considered. The requirements of the force in the limit work, the working conditions and the types of load often need to be considered in many aspects. If several slings are used together for lifting loads, the same type of slings must be used.
Whether or not the footnote or the soft bolt is necessary, the end of the lifting sprig and the footnote must be structurally reinforced. In addition, unmarked galvanized wire rope spreader should not be used without approval. The member on the spreader component shall be inspected regularly according to the requirement of the component. Do not correct the misinterpreted spreader by hammering. Do not drag or change the spreader from under the spreader.
The sling shall be the product that is produced, inspected and equipped with qualification certificate and maintenance and maintenance instructions by the technical manufacturer according to the specifications. The marked place of the finished product must be marked with not easy to damage, production serial number, manufacturing time and the name of the manufacturer.
Post time: Jun-13-2022