First, what is "synthetic fiber lifting belt"?
Synthetic fiber lifting belt, using high strength polyester or polypropylene and other industrial strong filament as raw material, woven by industrial loom. Compared with the traditional wire rope and chain sling, the synthetic fiber sling has the following advantages: it protects the object to be lifted from surface damage; High strength, light and easy to carry; Soft and easy to operate; Non-corrosive and non-conductive -Polyester Webbing Belt supplier
Two, "synthetic fiber hoisting belt" safety requirements:
1. Polyester Webbing Belt Supplier lifting Belt shall be scrapped if one of the following conditions occurs during use
Ribbon (including protective sleeve) severely worn, perforated, cut, torn.
Hoisting belt fiber softening, aging, elasticity becomes smaller, strength weakened.
The surface of the fiber is rough and easy to flake.
The lifting belt appears to be jammed.
Excessive spot-loose, corrosion, acid and alkali burning and heat melting or burning on the surface of the lifting belt.
Lifting belt with red warning line, warning line exposed.
2, in the welding work near the use of lifting belt to take protective measures, to avoid welding sparks and heat radiation damage and lifting belt.
3. Polyester Webbing Belt supplier shall protect the lifting Belt with coarse loads or sharp edges and corners.
4. The lifting belt and the lifting belt must not be knotted or tied together. Because the lifting belt has been damaged by sharp objects and cannot withstand high temperature, it is recommended to use wire rope for lifting operations in areas with dense reinforcement or welding accessories.
5. Do not hang the unfixed round lifting belt or flat lifting belt on the hook of the crane, so as not to drop the load due to the slip of the round lifting belt or flat lifting belt.
6, lifting belt can not be extruded, should be a number of lifting belt or lifting flat belt scattered to a number of hooks.
7. The round lifting belt is the only hanging device that can be loosened from the hook of the crane. The prerequisite for doing so is that each round lifting belt is not overlapped and the hook has enough space for use.
8, the lifting belt of the bundling sleeve binding, the correct use of the sling can control the weight well.
Post time: May-26-2022