It is difficult to measure the flat lifting belt with a ruler. Webbing Slings supplier has less flexibility because the lifting belt is a synthetic fiber product. When measuring the thickness of the measuring technique and the use of different rulers will cause a small range of errors. So it is very normal for users to buy home lifting belt thickness measurement error.
How to measure the thickness of flat lifting belt bought home? Webbing Slings: supplier
The common measuring tools are calipers and tape measures. Webbing Slings supplier can reduce part of the error no matter which ruler he uses. It is normal for the data measured with the ruler to fluctuate between 2 and 3 mm.
If the measurement results show that the value is greatly affected by the different measurement methods, the force used by Webbing Slings supplier and the measurement position will both affect the measurement data. A small child and an adult due to the different strength of the webbing press, the measured value will be a lot of deviation, such as large tonnage hoisting belt due to multi-layer suture together, the measured value will differ 1-2 cm, the edge position and the thickness of the suture position will also differ a lot.
In short, people will certainly be a lot of pressure to measure error with the hand, in order to measure the spectrum of the data also with the help of high-tech products, ultrasonic thickness meter, through the instrument can give ribbon measurement part exerts the same force, by ultrasonic pulse measure the thickness of the lifting belt, of course the instrument and only large-tonnage hoisting belt manufacturers can afford, as users want to go. If the user has special requirements, the manufacturer can help to measure it with the instrument.
Post time: Aug-23-2022