Synthetic fiber lifting belt can say in any environment is fit for use, and wire rope sling is not able to in high humidity or corrosive is used in the place of, compared to this, hoisting take advantage of the present, in order to improve the lifting belt use safety and work efficiency, in the humid environment to choose what kind of hoisting with high safety, listen to JiLi small make up slowly.
The nature of the factory workshop is different, the production environment is also very different, some because the workshop environment is more sealed and not ventilated, and some because it is the humidity of the processed objects.
Webbing Sling Belt is not to say that the use of high strength lifting Belt in a wet environment is not affected, but the impact of the relative wire rope is small, flat lifting Belt used in a wet environment will lead to a drop in tension, so as to reduce its working strength. So the lifting belt manufacturers recommend to buy the use of larger tonnage than the normal use of the lifting belt.
Polypropylene white lifting belt
In damp environment use polypropylene synthetic fiber lifting belt is more appropriate, because white polypropylene lifting with very low moisture absorption, moisture regain in room temperature close to 0, can be understood as a basic not hygroscopic, anti-mildew and polypropylene fibers, moth-proofing performance is good, in normal use, because it is not hygroscopic, so bacteria and moulds are difficult to survive. The moisture resistance of polypropylene fiber in synthetic fibers is yes.
The wear and tear of lifting belt in use is the concern of every customer. From the lifting belt material and production process determines that it is not so long wear wire rope.
It is a common situation that the annulus of lifting belt breaks. The manufacturer of Jili Rigging lifting belt will tell you the reason why the annulus of lifting belt breaks:
When buying the lifting Belt of Webbing Sling Belt, it will first estimate how many tons of the lifting item is, and then buy the appropriate lifting Belt according to the lifting object. The occurrence of ring fracture may be due to the misestimation of the weight of the hanging object, and the actual weight of the hanging object is higher than the estimated importance, and in the lifting process, Due to the uncertain factors such as too fast lifting or strong wind, the lifting belt cannot bear the weight of the goods and breaks, and the lifting belt fracture due to the heavy lifting of the goods will generally occur at the annulus position. The specific situation also needs specific analysis. When you use the lifting belt to break or wear, you can take photos on site and reflect them to the manufacturer. The manufacturer will analyze the cause of this situation according to the hanging objects and the hanging environment.
During the hoisting process, you should carefully observe the changes of the hoisting belt in the hoisting process, and stop hoisting immediately if wear occurs.
Post time: May-30-2022