Perfect every detail, surprise every customer on the use of synthetic fiber lifting belt details Hebei Jili summarized here the following points
1. Before use, please check whether the synthetic fiber hoisting belt is intact and can clearly express the use ability
2. The hoisting belt can be used in different specifications and models. Please strictly follow the instructions before use Webbing Slings supplier
3. If it is needed to be used together with the hook during lifting, the force point of the lifting belt must be suspended at the center of the hook, which is also the center of gravity position, and cannot be suspended at the tip of the hook to prevent decoupling
4. If the length of the lifting belt is not enough, do not tie it in knots Webbing Slings supplier
5. The material of the synthetic fiber hoisting belt is divided into several kinds. Please check whether the material of the hoisting belt conflicts with the use environment before use.Webbing Slings supplier
6. If the flat lifting belt is used with a slightly wider width, it is strictly prohibited to cut (the flat ribbon is made by the loom one-time weaving)
Synthetic flat lifting belt is made of industrial filament woven into flat webbing. There are many general weaving methods of ribbon weaving: the yarn meridian tube, weft forming the weft tube, inserted in the fixed tooth seat of the weaving machine, the weft tube along the figure 8 track rotation movement, in order to pull the yarn cross weaving. Usually the number of ingots is even, the woven band is tubular, the number of ingots is odd, the woven band is flat. The basic process of flat lifting belt after weaving is as follows: coloring by high temperature printing and dyeing machine – cutting by technical personnel – stitching by *** personnel – follow-up inspection (spot inspection) – post-packaging. Simple process complex process a qualified finished product lifting belt is done.
Post time: Sep-21-2022