Lifting belt Conventional models are round lifting Round Slings Endless belt belt and flat lifting belt, the latter is made of synthetic fiber industrial filament woven into flat webbing and then stitched. Compared with the circular lifting belt, the flat lifting belt is more resistant to wear, and the wide and flat contact surface makes it easier to protect the suspended object. Of course, in the protection of hanging objects at the same time, how to make their own more wear resistance is also as a perfect lifting belt manufacturers should understand. Round Slings Endless belt After continuous improvement and perfection, later found in the weaving ribbon ribbon, twill, satin inside, wear-resistant for the plain. Use the lifting belt from the beginning to understand.
It is not allowed to overload the use of lifting belt. If several lifting belts are used at the same time, the load should be evenly distributed in several lifting belts as far as possible. It IS NOT ALLOWED TO CONNECT THE SOFT RING WITH THE device that may cause damage to it. The hanging device connected with the soft ring shall be smooth and without sharp edges, and its size and shape shall not tear the suture of the lifting belt. Do not drag lifting belts and cargo when moving them. Do not knot or twist the lifting belt. Do not allow the lifting belt to Round Slings Endless belt hang the goods for too long. It is not allowed to use lifting belt without sheath to carry the goods with sharp corners and edges. When the goods stay on the lifting belt, the lifting belt shall not be pulled out from the bearing state. If the lifting belt is used in high temperature or in abnormal environment such as lifting chemical substances, it should be used in accordance with the manufacturer’s instructions and recommendations. After the lifting belt is dirty or used in an environment prone to acid or alkali, it should be washed immediately with cool water. The lifting belt should be stored under the condition of avoiding light and no ultraviolet radiation. The lifting belt should not be stored near the open fire or other heat sources
Post time: Oct-12-2022